Wholesale Car Exterior Decorative Accessories ABS Car Body Side Trims For Toyota Sienna 2021

Product Description

The main function of the car decorative strip is to decorate the car and improve the overall aesthetic feeling. The installation method of the window decorative strip:

1. Thoroughly clean the surface of the window frame, make sure the surface of the window frame is clean and dry;

2. Disassemble the decorative strip. Before pasting, be sure to adjust its installation position, and then tear off the protective film for pasting;

3. When pasting the decorative bright strip, press it hard several times, and then press it for 5-10 minutes to ensure the full contact and wetting of the glue surface.

Decorative strips can effectively enhance the interior quality through the combination of different colors, textures and materials. In order to ensure a good bonding force between the frame of the decorative strip and the surface decoration layer, the frame material is usually ABS or PC+ABS. The decorative strip technology mainly includes leather texture, spray paint, electroplating, water transfer printing, IMD, INS, TOM, real aluminum, real wood, etc. Many mid-to-high-end models also have a variety of combined decorations. With the global emphasis on environmental protection requirements, painting, electroplating, water transfer printing, etc. are more replaced by in-mold decoration due to the impact on the environment in the production process. In-mold decoration is favored by more car companies due to its low pollution to the processing environment and diverse texture options.

Considering the convenience of disassembly and assembly, the decorative strip is generally fastened to the counterpart (upper decorative plate or body) by Snap buckle. If the part is large or the structural space is insufficient, it can also be fastened by welding. For electroplating decorative strips, it is recommended to adopt the clamping method. If it is fastened by welding, the welding post can be in the form of cross ribs to prevent the accumulation of electroplating solution in the cylindrical welding post. For film decoration, the tensile properties of the film, draft angle, minimum rounded corners, etc. should be considered. In comparison, TOM and INS films have better tensile properties, but IMD has poorer tensile properties. In addition, different trimming processes have different requirements on the shape of parts, and the limitations and influences of process factors should be considered in the early modeling stage.